Audiopipe APSBSP12SLM 12" High Performance Bass Enclosure 800W Max

Audiopipe APSB-SP12SLM
Key Features:

• Product Type: Loaded Sealed Bass Enclosure
• Subwoofer Size: 12 in
• Number of Subwoofers: 1
• Design: Shallow-mount
• Enclosure Type: Sealed / airtight
• Maximum Power: 800W Max
• RMS Power: 400W RMS
• Impedance: Single 4 Ohm / 4Ω Mono
• Voice Coil: 3 in, 4-layer BASV single voice coil
• Magnet: 65 oz
• Application: Automotive car audio
• Amplifier Included: No — passive enclosure Audiopipe

Construction

• High-fidelity acoustic-grade MDF enclosure
• Airtight sealed chamber
• Durable dark gray carpet covering
• 12" shallow-mount subwoofer
• Non-pressed paper cone
• Foam surround
• Powder-coated black aluminum basket
• 65 oz magnet structure. Audiopipe

Features

• Space-saving shallow enclosure design
• Loaded enclosure — the 12" subwoofer is already installed
• Sealed design provides tight, controlled bass response
• Single 4-ohm configuration for straightforward mono-amplifier matching
• Large 3" voice coil for improved heat handling
• Compact wedge-style enclosure suitable for installations with limited space
• Carpeted exterior helps protect the enclosure in automotive environments. Audiopipe

Dimensions

Audiopipe currently specifies the enclosure at:

• Width: 21.75 in
• Height: 14 in
• Depth: 7-5/16 in (approximately 7.31 in) Audiopipe

A distributor lists 22.5 × 15 × 9.5 in and 31.6 lb, but those larger measurements appear to be packaged/shipping dimensions, because the same listing separately gives the enclosure itself as 21.75 × 14 × 7-5/16 in. Beach Audio

Product weight: Audiopipe's current official page does not provide a confirmed bare enclosure weight.
Shipping weight: Approximately 31.6 lb from distributor data. Beach Audio

Performance

• Maximum Power: 800W
• RMS Power: 400W
• Nominal Impedance: 4Ω
• Voice Coil: Single 3" 4-layer BASV
• Magnet: 65 oz
• Sealed enclosure emphasizes controlled, accurate low-frequency response rather than the higher output around tuning frequency typical of a ported enclosure. Audiopipe

For amplifier matching, use the 400W RMS / 4-ohm specification rather than choosing an amplifier solely from the 800W maximum rating.

Applications

Designed for:

• Car audio systems
• Trucks
• SUVs
• Other compatible 12V automotive audio installations
• Installations where a relatively slim enclosure is needed

Fitment should be confirmed using the enclosure's 21.75 × 14 × 7-5/16 in dimensions. Audiopipe

Included

• 1 × Audiopipe APSB-SP12SLM sealed enclosure
• 1 × Pre-installed 12" shallow-mount subwoofer

Not included:

• Amplifier
• Amplifier wiring kit
• External bass controller Audiopipe