ORION XTR 1000W RMS Monoblock Class D Car Audio Subwoofer Amplifier
Orion XTR XTR1000.1D
Key Features:
- Product Type: Monoblock Car Audio Amplifier
- Amplifier Class: Class D
- Number of Channels: 1 (Mono)
- Advertised RMS Power: 1000 Watts
- RMS Power at 1 Ohm: 1000 Watts
- RMS Power at 2 Ohms: 790 Watts
- RMS Power at 4 Ohms: 510 Watts
- Minimum Operating Speaker Impedance: 1 Ohm
- Frequency Response: 15 Hz–250 Hz
- Signal-to-Noise Ratio: Greater Than 90 dB
- Operating Voltage: 9–16V DC
- Amplifier Efficiency: Greater Than 80%
- Country of Manufacture: Korea
- Application: Automotive Subwoofer Amplification
- Quantity: 1 Amplifier
- CONSTRUCTION
- Class D amplifier circuitry designed for efficient subwoofer amplification.
- MOSFET power supply and output stage support high-power operation.
- Heavy-gauge power and speaker terminals accommodate compatible wiring.
- Integrated aluminum-style heat-dissipating chassis supports thermal management.
- Built-in electronic crossover circuitry provides adjustable bass filtering.
- Integrated power and protection indicators display amplifier status.
- Electronic protection circuitry monitors operating conditions.
- Compact construction supports installation in suitable vehicle locations.
FEATURES
- 1000-watt RMS monoblock amplifier designed for high-output car audio systems.
- Class D technology provides efficient low-frequency amplification.
- 1-ohm stable design supports compatible subwoofer configurations.
- RMS output of 790 watts at 2 ohms and 510 watts at 4 ohms.
- Adjustable low-pass crossover allows bass frequency customization.
- Variable bass boost provides up to +18 dB of adjustment.
- Adjustable subsonic filter helps control very low-frequency output.
- Variable phase control supports subwoofer system alignment.
- Adjustable input sensitivity accommodates compatible audio sources.
- RCA pass-through output supports additional audio equipment connections.
- MOSFET power supply supports efficient electrical operation.
- Soft turn-on and turn-off circuitry helps reduce switching noise.
- Power and protection LED indicators provide operating status.
- Protection circuitry addresses thermal conditions, DC offset, short circuits, and voltage abnormalities.
- Compatible with properly matched aftermarket subwoofers.
DIMENSIONS
- Length: 8.66 Inches (220 mm)
- Width: 9.25 Inches (235 mm)
- Height: 2.75 Inches (70 mm)
- Positive Power Terminal: 4 AWG
- Ground Terminal: 4 AWG
- Remote Turn-On Terminal: 12 AWG
- Speaker Output Terminal: 12 AWG
PERFORMANCE
- Amplifier Type: Class D Monoblock
- Number of Channels: 1
- RMS Power at 4 Ohms: 510W × 1
- RMS Power at 2 Ohms: 790W × 1
- RMS Power at 1 Ohm: 1000W × 1
- Manufacturer Power Measurements: 0.5% THD+N
- Frequency Response: 15–250 Hz
- Linear Bandwidth: 15–250 Hz (±3 dB)
- Low-Pass Crossover: 30–300 Hz
- Low-Pass Filter Slope: 12 dB/Octave
- Subsonic Filter: 10–25 Hz
- Bass Boost: 0 to +18 dB
- Phase Adjustment: 0–180°
- Input Sensitivity: 0.2–6.0V
- Signal-to-Noise Ratio: Greater Than 90 dB
- Total Harmonic Distortion and Noise: 0.5%
- Amplifier Efficiency: Greater Than 80%
- Damping Factor: Manufacturer-Listed as 200 dB
- Operating Voltage: 9–16V DC
- Fuse Configuration: 2 × 40A ATC Fuses
- Total Recommended Fuse Rating: 80 Amps
- Protection Features: Thermal, DC Offset, Short Circuit, Undervoltage, and Overvoltage Monitoring
- Designed for compatible 1-ohm, 2-ohm, and 4-ohm subwoofer loads.
APPLICATIONS
- High-Power Car Audio Subwoofer Systems
- Aftermarket Car Audio Amplifier Upgrades
- Single Subwoofer Installations
- Multiple Subwoofer Configurations
- Compatible 1-Ohm Subwoofer Systems
- Compatible 2-Ohm Subwoofer Systems
- Compatible 4-Ohm Subwoofer Systems
- Car, Truck, and SUV Audio Installations
- Custom Automotive Bass Systems
- Competition-Style Car Audio Projects
- RCA-Based Aftermarket Audio Systems
INCLUDED
- (1) Orion XTR1000.1D Class D Monoblock Amplifier
- Integrated Electronic Crossover Controls
- Integrated Bass Boost and Phase Adjustment Controls
- Integrated Power and Protection LED Indicators
- Integrated Power, Ground, Remote, and Speaker Terminals
NOTE: Remote bass controller, RCA cables, power wiring, mounting hardware, and additional accessories are not included.
